Nhà Thầu Hệ Thống Điện Nhẹ - Hạ Tầng Thông Tin Chuyên Nghiệp
0879 888 822
2 x 10GE SFP+ slots, 10 x GE RJ45 ports (including 1 x MGMT port, 1 X HA port, 8 x switch ports), 8 x GE SFP slots, SPU NP6 and CP9 hardware accelerated
The FortiGate 500E delivers next generation firewall capabilities for mid-sized to large enterprises, with the flexibility to be deployed at the campus or enterprise branch. Protects against cyber threats with security processor powered high performance, security efficacy and deep visibility.
Security
Protects against known exploits, malware and malicious websites using continuous threat intelligence provided by FortiGuard Labs security services
Performance
Delivers industry’s best threat protection performance and ultra-low latency using purpose-built security processor (SPU) technology
Certifcation
Independently tested and validated best security effectiveness and performance
Networking
Delivers extensive routing, switching, wireless controller and high performance IPsec VPN capabilities to consolidate networking and security functionality
Management
Single Pane of Glass with Network Operations Center (NOC) view provides 360° visibility to identify issues quickly and intuitively
Security Fabric
Enables Fortinet and Fabric-ready partners’ products to collaboratively integrate and provide end-to-end security across the entire attack surface
Firewall
|
IPS
|
NGFW
|
Threat Protection
|
Interfaces
|
---|---|---|---|---|
36 Gbps
|
5.2 Gbps
|
5 Gbps
|
4.7 Gbps
|
Multiple GE RJ45, GE SFP and 10 GE SFP+ Slots
|
FortiGate 500E
|
|
---|---|
Hardware Specifications | |
10 GE SFP+ Slots |
2
|
GE RJ45 Interfaces |
8
|
GE SFP Slots |
8
|
GE RJ45 Management Ports |
2
|
USB Ports |
2
|
RJ45 Console Port |
1
|
Local Storage |
NL
|
Included Transceivers |
2x SFP (SX 1 GE)
|
System Performance and Capacity | |
IPv4 Firewall Throughput (1518 / 512 / 64 byte, UDP) |
36 / 36 / 32 Gbps
|
Firewall Throughput (1518 / 512 / 64 byte UDP packets) |
36 / 36 / 32 Gbps
|
Firewall Latency (64 byte UDP packets) |
2 μs
|
Firewall Throughput (Packets Per Second) |
33 Mpps
|
Concurrent Sessions (TCP) |
8 Million
|
New Sessions/Second (TCP) |
300,000
|
Firewall Policies |
10,000
|
IPsec VPN Throughput (512 byte) 1 |
20 Gbps
|
Gateway-to-Gateway IPsec VPN Tunnels |
2,000
|
Client-to-Gateway IPsec VPN Tunnels |
50,000
|
SSL-VPN Throughput |
5 Gbps
|
Concurrent SSL-VPN Users (Recommended Maximum, Tunnel Mode) |
500
|
SSL Inspection Throughput 3 |
6.8 Gbps
|
Application Control Throughput (HTTP 64K) 2 |
14 Gbps
|
CAPWAP Throughput (1444 byte, UDP) |
18 Gbps
|
Virtual Domains (Default / Maximum) |
10 / 10
|
Maximum Number of Switches Supported |
NA
|
Maximum Number of FortiAPs (Total / Tunnel) |
512 / 256
|
Maximum Number of FortiTokens |
1,000
|
Maximum Number of Registered Endpoints |
600
|
High Availability Configurations |
Active-Active, Active-Passive, Clustering
|
System Performance — Optimal Traffic Mix | |
IPS Throughput 2 |
11 Gbps
|
System Performance — Enterprise Traffic Mix | |
IPS Throughput 2 |
5.2 Gbps
|
NGFW Throughput 2,4 |
5 Gbps
|
Threat Protection Throughput 2,5 |
4.7 Gbps
|
Dimensions | |
Height x Width x Length (inches) |
1.77 x 17.0 x 15.0
|
Height x Width x Length (mm) |
45 x 432 x 380
|
Weight |
16.1 lbs (7.3 kg)
|
Form Factor |
Rack Mount, 1 RU
|
Power Consumption (Average / Maximum) |
100 W / 188 W
|
Power Source |
100–240V 60–50Hz
|
Current (Maximum) |
6A
|
Heat Dissipation |
613 BTU/h
|
Environment | |
Operating Temperature |
32–104°F (0–40°C)
|
Storage Temperature |
-31–158°F (-35–70°C)
|
Humidity |
10–90% non-condensing
|
Noise Level |
43 dBA
|
Operating Altitude |
Up to 7,400 ft (2,250 m)
|
Compliance |
FCC Part 15 Class A, C-Tick, VCCI, CE, UL/cUL, CB
|
Certifications |
ICSA Labs: Firewall, IPsec, IPS, Antivirus, SSL-VPN; USGv6/IPv6
|
Note: All performance values are "up to" and vary depending on system configuration. IPsec VPN performance is based on 512 byte UDP packets using AES-256+SHA1.
1. IPsec VPN performance test uses AES256-SHA256.
2. IPS (Enterprise Mix), Application Control, NGFW and Threat Protection are measured with Logging enabled.
3. SSL Inspection performance test uses TLS v1.2 with AES128-SHA256.
4. NGFW performance is measured with Firewall, IPS and Application Control enabled.
5. Threat Protection performance is measured with Firewall, IPS, Application Control and Malware Protection enabled.