Ruckus ICX7750-48C 48-Port 1/10 GbE RJ-45 10GBASE-T Switch with 6x40 GbE QSFP Ports and Modular Interface Slot

Thông tin chung:

Ruckus ICX 7750 48-Port 1/10 GbE RJ-45 10GBASE-T Switch with 6x40 GbE QSFP Ports and Modular Interface Slot
No power supplies or fan units (must be ordered separately). No optics. Requires ICX7750-L3-COE Certificate of Entitlement to use advanced Layer 3 features.

Danh mục: Thiết Bị Chuyển Mạch

Specifications:

	ICX 7750-26Q	ICX 7750-48F	ICX 7750-48C
Ports	26 QSFP+ Ports	48 SFP+ Ports	48 10GBASE-T Ports
Switching capacity (data rate, full duplex)	2.56 Tbps	1.92 Tbps	1.92 Tbps
Forwarding capacity (data rate, full duplex)	1.90 Bpps	1.44 Bpps	1.44 Bpps
Fixed ports: 1/10 Gbps SFP/SFP+	-	48	-
Fixed ports: 100 Mbps, 1/10 Gbps 10GBASE-T RJ45	-	-	48
Fixed ports: 40 Gbps QSFP+	26	6	6
Modular slots	1	1	1
Modular ports: 40 Gbps QSFP+ (max.)	6	6	6
Latency	550 ns	550 ns	40 Gbps - 40 Gbps: 550 ns 10 Gbps -10 Gbps: 2.9 µs
Dynamic packet buffer size	12.2 MB	12.2 MB	12.2 MB
Base IPv4/IPv6 Layer 3 routing entitlement (Static Routing, RIP)	Yes	Yes	Yes
Advanced IPv4/v6 Layer 3 routing (OSPF, BGP, PIM, PBR, VRF)	With Certificate of Entitlement	With Certificate of Entitlement	With Certificate of Entitlement
Aggregated stacking bandwidth (data rate, full duplex)	5.76 Tbps	5.76 Tbps	5.76 Tbps
Stacking density (maximum switches in a stack)	12	12	12
Stacking ports (maximum ports usable for stacking)	Up to 12×40 GbE QSFP+ per switch	Up to 12×40 GbE QSFP+ per switch	Up to 12×40 GbE QSFP+ per switch
Maximum stacking distance (distance between stacked switches)	10 km	10 km	10 km
Power	ICX 7750-26Q	ICX 7750-48F	ICX 7750-48C
Power inlet (AC)	C14	C14	C14
Input voltage/frequency	AC: 100 to 240 VAC @ 50 to 60 Hz DC: 40 to 60 VDC
Maximum current draw	586 W	586 W	586 W
Power supply rated maximum (AC)	2×500 W	2×500 W	2×500 W
Power supply rated maximum (DC)	2×500 W	2×500 W	2×500 W
Switch power utilization1 (25°C) Typical Maximum	274 W 350 W	250 W 327 W	511 W 586 W
Switch heat dissipation1 (25°C) Typical Maximum	935 BTU/hour 1,194 BTU/hour	853 BTU/hour 1,116 BTU/hour	1,744 BTU/hour 2,000 BTU/hour
Environment
Net Weight (with 2 power supplies, 4 fans, optional 6 ports module, no transceivers)	8.83 kg (19.43 lb)	9.08 kg (19.98 lb)	10.17 kg (22.38 lb)
Dimensions	440 mm (17.323 in.) W 406.4 mm (16 in.) D 43.6 mm (1.730 in.) H; (1U)	440 mm (17.323 in.) W 406.4 mm (16 in.) D 43.6 mm (1.730 in.) H; (1U)	440 mm (17.323 in.) W 431 mm (16.97 in.) D 43.6 mm (1.730 in.) H; (1U)
Acoustics (25°C, ISO 7779)	62 dBA	62 dBA	62 dBA
MTBF(25°C)	364,061 hours	353,967 hours	259,199 hours
Temperature	Operating temperature: −5°C to 45°C, 50°C at sea level (0°F to 113°F, 122°F at sea level) Non-operating temperature: −40ºC to 60ºC (−40ºF to 140ºF)		Operating temperature: 40°C at sea level (0°F to 96°F, 96°F at sea level) Non-operating temperature: −40ºC to 60ºC (−40ºF to 140ºF)
Humidity	Operating relative humidity: 10% to 90% at 50ºC (122ºF) Non-operating relative humidity: 10% to 90% at 60ºC (140ºF)		Operating relative humidity: 10% to 90% at 40ºC (104ºF) Non-operating relative humidity: 10% to 90% at 60ºC (140ºF)
Altitude	Operating altitude: 10,000 ft (3,000 m) maximum Storage altitude: 39,000 ft (12,000 m) maximum
Specifications
Connector options	1002/1000 Mbps, 10 Gbps 10GBASE-T ports: RJ-45 1/10 Gbps SFP+ ports 40 Gbps QSFP+ ports Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45 Console management: mini-USB serial port (Mini-B plug) RS-232 serial signals File transfer: USB port, (standard-A plug)
DRAM	8 GB
NVRAM (Flash)	2 GB
Packet buffer size	12.2 MB
Maximum MAC addresses	96,000 (switch image), 32,000 (router image)
Maximum VLANs	4,096
Maximum PVLANs	32
Maximum STP (spanning trees instances)	254
Maximum VEs	512
Maximum routes (in hardware)	IPv4 routes: Up to 128K (shared resource) IPv6 routes: Up to 7K (shared resource) Next Hop Addresses: Up to 16,000 (shared resource)
Trunking	Maximum ports per trunk: 16 Maximum trunk groups: 256x8 or 128x16 per stack
Maximum jumbo frame size	9,216 bytes
Average latency	1.3 µs
QoS Priority Queues	8 per port
Multicast Groups	8,192 (Layer 2) 6,144 (Layer 3)
Compliance/Certification
Electromagnetic emissions	FCC Class A (Part 15); EN 55022/CISPR-22 Class A; VCCI Class A; ICES-003 Electromagnetic Emission; AS/NZS 55022; EN 61000-3-2 Power Line Harmonics; EN 61000-3-3 Voltage Fluctuation and Flicker; EN 61000-6-3 Emission Standard (supersedes: EN 50081-1)
Safety	CAN/CSA-C22.2 NO. 60950-1-07; UL 60950-1 Second Edition; IEC 60950-1 Second Edition; EN 60950-1:2006 Safety of Information Technology Equipment; EN 60825-1 Safety of Laser Products—Part 1: Equipment Classification, Requirements and User’s Guide; EN 60825-2 Safety of Laser Products—Part 2: Safety of Optical Fibre Communication Systems
Immunity	EN 61000-6-1 Generic Immunity and Susceptibility (supersedes EN 50082-1); EN 55024 Immunity Characteristics (supersedes EN 61000-4-2 ESD); EN 61000-4-3 Radiated, Radio Frequency, Electromagnetic Field; EN 61000-4-4 Electrical Fast Transient; EN 61000-4-5 Surge; EN 61000-4-6 Conducted Disturbances Induced by Radio-Frequency Fields; EN 61000-4-8 Power Frequency Magnetic Field; EN 61000-4-11 Voltage Dips and Sags
Environmental regulatory compliance	RoHS-compliant (6 of 6); WEEE-compliant
Vibration	IEC 68-2-36, IEC 68-2-6
Shock and drop	IEC 68-2-27, IEC 68-2-32

1 Traffic load is based on utilizing all ports.
2 100 Mbps in full duplex mode only

Specification Feature Set:

Layer 2 feature set

802.1s Multiple Spanning Tree
802.1x Authentication with dynamic VLAN and ACLs
Auto MDI/MDIX
BPDU Guard, Root Guard
Dual-Mode VLANs
Dynamic VLAN Assignment
Dynamic Voice VLAN Assignment
Fast Port Span
GVRP: GARP VLAN Registration Protocol
IGMP Snooping (v1/v2/v3)
IGMP Proxy for Static Groups
IGMP v2/v3 Fast Leave
Inter-Packet Gap (IPG) adjustment
Link Fault Signaling (LFS)
MAC Address Filtering
MAC Learning Disable
MLD Snooping (v1/v2)
Multi-device Authentication
Per-VLAN Spanning Tree (PVST/PVST+/PVRST)
Mirroring—Port-based, ACL-based, MAC Filter-based, and VLAN-based
PIM-SM v2 Snooping
Port Loop Detection
Private VLAN
Remote Fault Notification (RFN)
Single-instance Spanning Tree
Trunk Groups (static, LACP)
Uni-Directional Link Detection (UDLD)
Metro-Ring Protocol MRP (v1, v2)
Virtual Switch Redundancy Protocol (VSRP)
Topology Groups
Q-in-Q
MCT (Ruckus Multi-Chassis Trunking)

Base Layer 3 IP routing feature set

IPv4 and IPv6 static routes
RIP v1/v2, RIPng (IPv6)
ECMP (up to 32 paths)
Port-based Access Control Lists
Layer 3/Layer 4 ACLs
Host routes
Virtual Interfaces
Routed Interfaces
Route-only Support
Routing Between Directly Connected Subnets
Virtual Route Redundancy Protocol (VRRP)

Premium Layer 3 IP routing feature set
(with Certificate of Entitlement)

IPv4 and IPv6 dynamic routes
OSPF v2, OSPF v3 (IPv6)
PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4/IPv6 multicast routing functionality)
PBR
VRRP-E (IPv4, IPv6)
VRRPv3 (IPv6)
BGP4, BGP4+ (IPv6)
GRE
IPv6 over IPv4 tunnels
VRF (IPv4 and IPv6)

Quality of Service (QoS)

ACL Mapping and Marking of ToS/DSCP
ACL Mapping and Marking of 802.1p
ACL Mapping to Priority Queue
ACL Mapping to ToS/DSCP
Classifying and Limiting Flows Based on TCP Flags
DiffServ Support
Honoring DSCP and 802.1p
MAC Address Mapping to Priority Queue
Priority Queue Management using Weighted Round Robin (WRR), Strict Priority (SP), and a combination of WRR and SP
Priority Flow Contro

Traffic management

ACL-based inbound rate limiting and traffic policies
Broadcast, multicast, and unknown unicast rate limiting
Inbound rate limiting per port
Outbound rate limiting per port and per queue

Network and Device Management

DHCP Auto Configuration
Configuration Logging
Digital Optical Monitoring
Display Log Messages on Multiple Terminals
Embedded Web Management (HTTP/HTTPS)
Embedded DHCP Server
Industry-standard Command Line Interface (CLI)
Brocade Network Advisor (sold separately)
Key-based activation of optional software features
Integration with HP OpenView
Out-of-band Ethernet Management
ERSPAN support for remote troubleshooting and traffic monitoring
TFTP
TELNET Client and Server
Bootp
1157 SNMPv1/v2c
DHCP Server and DHCP Relay
SNMPv3 Intro to Framework
Architecture for Describing SNMP Framework
SNMP Message Processing and Dispatching
SNMPv3 Applications
SNMPv3 User-based Security Model
SNMP View-based Access Control Model SNMP
sFlow
NTP Network Time Protocol
Multiple Syslog Servers
Virtual Cable Tester (VCT)

Compare:

Ruckus ICX Switch Family

	ICX 7150 Compact	ICX 7150	ICX 7150 Z-Series	ICX 7250	ICX 7450	ICX 7750
	Access				Access/ Aggregation	AGG/Core
Switch Capacity
Switching capacity (max)	68 Gbps	180 Gbps	304 Gbps	256 Gbps	336 Gbps	576 Gbps
1 GbE RJ-45 ports	12 +2	24 or 48 +2	48	24 or 48	24, 32 or 48	48
1 GbE SFP ports	2	4	8	8	48	48
1/2.5 GbE RJ-45 ports			16		8
10 GbE SFP+ ports (max)	2	4	8	8	12	962
10 GbE RJ-45 ports (max)					12	48
40 GbE QSFP+ ports (max)					3	32
PoE Power Budget (max)	124 W	740 W	1480 W	1480 W1	1496 W
Switches per stack (max)	12	12	12	12	12	12
Aggregated stack bandwidth	240 Gbps	480 Gbps	480 Gbps	480 Gbps	960 Gbps	5.76 Tbps
Key Features
PoE / PoE+
Stacking	3	3
sFlow
L3: Static Routing / RIP/ OSPF	3	3
OpenFlow	3	3
EEE (Energy Efficient Ethernet)
Campus Fabric	3	3	3
Redundant power option
Hot-Swap PSUs & Fans
Multigig (IEEE 802.3bz)
PoH (90W per port)
L3: BGP
L3: VRF
MACsec
IPsec VPN
Reversible airflow option
MCT